USBDemo, something to learn USB a little bit

[precision]

Can i use this demo with DasyLab Or Labview ? I using both software from long time for DAQ.
Thanks

.

[mister_e]

Can i use this demo with DasyLab Or Labview ? I using both software from long time for DAQ.
Thanks

.

Sorry, i don't use them

Johan, it's really a trough hole PLCC44 socket
Digikey:
A-CCS44-Z-R


OR
940-44-044-24-000000

OR
8444-11B1-RK-TP

[Johan]

Steve

Yes, it is indeed just a plain PLCC socket,

I was mistaking it as something else , I thought it was a " mini" plcc44,that fits inside DIP 40 socket, but after I look more closer, it is bigger than the DIP

I never use PLCC44 socket before, will it fit to QFN 8x8 type PIC 18F4431 ?

[mister_e]

Nope, it's really 2 different animal. Even if possible, good luck with home made soldering for QFN packages

the easiest home made soldering would be DIP or TQFP packages.

But yes you can buy some QFN adapter.. make sure you're wallet is ready for that talking about those no solder type... kind of ZIFF for QFN... see those

http://www.ironwoodelectronics.com/c...-P-Z-01Dwg.pdf
http://qfp-adapter.com/Site/QFN-MLF-...cket-TOPs.htm#