Hi Darrel

The resistors are set up to provide a range of voltages somewhere between 0 and 4.75 volts to a/d for battery voltage of 0 to 20. I am still tweaking them to push it as close to 5 volts as possible. (will change the a/d numbers in the code accordingly to get as close to 12 and 16 volts as possible)
I am not quite sure I understand your first email! Would you mind changing the code in my example to what it should be and re post it? I would really appreciate this, since this chip seems to have caused many an otherwise good code writer to "come unglued"! I do know that its Data Sheet is based on MPASM and Microchip's language; but I have tried for 10 years, and cannot make sense of that jibberish, anyway!!

Thanks again!
Ron