GPS decoding problems

Closed Thread
Results 1 to 17 of 17

Hybrid View

  1. - 17th April 2010, 16:48 #1
    sradayda's Avatar
    sradayda
    sradayda is offline Junior Member
    Join Date
    Apr 2010
    Posts
    6

    Did you find this post helpful? Yes | No

    Default

    Thanx so much .. I really appreciate it
    Could you please provide me with GPS hardware connections with the pic ?
  2. - 17th April 2010, 18:51 #2
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    What are you using for the GPS? A handheld unit or a module?
    Dave
    Always wear safety glasses while programming.
  3. - 18th April 2010, 15:31 #3
    sradayda's Avatar
    sradayda
    sradayda is offline Junior Member
    Join Date
    Apr 2010
    Posts
    6

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by mackrackit View Post
    What are you using for the GPS? A handheld unit or a module?
    I am using a module.
  4. - 18th April 2010, 15:46 #4
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    The module data sheet should give the pin out. RX and TX.
    Dave
    Always wear safety glasses while programming.
  5. - 18th April 2010, 16:27 #5
    sradayda's Avatar
    sradayda
    sradayda is offline Junior Member
    Join Date
    Apr 2010
    Posts
    6

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by mackrackit View Post
    The module data sheet should give the pin out. RX and TX.
    Thanks, but to which pins of the pic16f877 should these pins be connected ??
  6. - 18th April 2010, 16:48 #6
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Well.... Back to the data sheet if you are planning to use the USART. Pins RC6 and 7.

    If you are going to use SERIN2 then just about any of the pins will work.
    Dave
    Always wear safety glasses while programming.
« Previous Thread | Next Thread »

Similar Threads

  1. GPS $GPRMC to PIC16F684. Need help with SERIN2
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 27th November 2009, 09:47
  2. GPS clock timing !
    By bethr in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 3rd July 2008, 20:11
  3. Connecting GPS Engine Board to PC Serial Port
    By srspinho in forum GPS
    Replies: 2
    Last Post: - 28th April 2006, 12:10
  4. GPS Receiver
    By lester in forum Adverts
    Replies: 2
    Last Post: - 22nd February 2006, 12:47
  5. GPS decoding
    By Macgman2000 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 7th May 2005, 20:42

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules