Serin serout problem

[lerameur]

ok, working now, Try2 was not initialized

the sending counter works, but is about incrementing once every .5 seconds
With temperature showing on the first line
The second lcd (receiving) nothing on the first line , and the counter is not counting, The counter starts when the wire (input) is disconnected
but NO Tc anf Tf
k

[skimask]

ok, working now, Try2 was not initialized

the sending counter works, but is about incrementing once every .5 seconds
With temperature showing on the first line
The second lcd (receiving) nothing on the first line , and the counter is not counting, The counter starts when the wire (input) is disconnected
but NO Tc anf Tf
k

Which PIC are you using?
And while we're at it, try changing the receiving PIC receiving line over to portb.2 and change the references. Who knows...maybe you blew out a pin.

[lerameur]

I have not changed Pic16f88

I also tried f84a, same thing
I dont have much in the 6 series, more in the 18,

[skimask]

I have not changed Pic16f88

I also tried f84a, same thing
I dont have much in the 6 series, more in the 18,

Have you got PGM pulled low for your programmer?

[lerameur]

dont know, I am using this programmer:

http://www.olimex.com/dev/pic-mcp-usb.html

[skimask]

dont know, I am using this programmer:

http://www.olimex.com/dev/pic-mcp-usb.html

Move the serial input port on the receiver from RB3 to RB2 and change the program as required.

[lerameur]

nothing, i tried that before, acually I tried all the ports (B), same thing.

k