I tried that too,but I get 2 degrees steady output. I thought it would be somewhere in my LCDout command,

Start_Convert:
OWOUT Comm_Pin, 1, [$CC, $44]' Skip ROM search & do temp conversion
Wait_Up:
OWIN Comm_Pin, 4, [Busy] ' Read busy-bit
IF Busy = 0 THEN Wait_Up ' Still busy..?, Wait_Up..!
OWOUT Comm_Pin, 1, [$CC, $BE]' Skip ROM search & read scratchpad memory
OWIN Comm_Pin, 2, [R_Temp.Lowbyte, R_Temp.Highbyte]' Read two bytes / end comms
GOSUB Convert_Temp
GOTO Start_Convert
'65
Convert_Temp: ' +32.0 to +257 F
Sign = "+"
Dummy = 625 * R_Temp ' Multiply to load internal registers with 32-bit value
TempC = DIV32 10 ' Use Div32 value to calculate precise deg C
Dummy = 1125 * R_Temp
TempF = DIV32 100

TempC = (R_Temp & $0FF0) >> 4 ' Mask middle 8-bits, shift into lower byte
Float = ((R_Temp.Lowbyte & $0F) * 625) ' Lower 4-bits of result * 625
Lcdout $fe, 1 'Clear screen
Lcdout " TempC = ",Sign,DEC TempC,".",DEC Float,Deg,"C " 'Display the decimal value
RETURN