16f88 can't get lcd to work

[Archangel]

Joe . . .

AND NEVER EVER END A PROGRAM WITH A SINGLE <h1>END</h1> STATEMENT... use STOP OR an endless loop

...

Sorry about that mister_e, it got by me on the fourth paste, I had installed a goto main and then did a repaste and, oops left it out. As for mpasm config fuses . . . I kept getting errors using this format

@ __config _INTRC_OSC_NOCLKOUT & _WDT_ON & _PWRTE_ON & _MCLRE_OFF & _LVP_OFF & _BODEN_ON

but not this exact code. I have edited above post.
JS

[mister_e]

Yeah F88 is a bit like some 18F, try something around those bellow

    '
    '    Pic Configuration
    '    =================
    '    Program Configuration Register 1
    @	__CONFIG    _CONFIG1, _CP_OFF & _CCP1_RB0 & _DEBUG_OFF & _WRT_PROTECT_OFF & _CPD_OFF & _LVP_OFF & _BODEN_ON & _MCLR_OFF & _PWRTE_ON & _WDT_OFF & _INTRC_IO		    		 

    '    Program Configuration Register 2
    @   __CONFIG    _CONFIG2, _IESO_OFF & _FCMEN_OFF

[Archangel]

Hi Mister_e,
The 16F88 seems to be extra labor intensive and not suitable for newbies, as it has so many registers that require you to set and other little quirks, there are several open posts this month by people (like myself) who are a little short on experience, that are having trouble with this device. I think they would do better with a 16F628a / 648a or 16F876 / 877 etc. At least until they get their sealegs.

[keithdoxey]

Hi Mister_e,
The 16F88 seems to be extra labor intensive and not suitable for newbies, as it has so many registers that require you to set and other little quirks, there are several open posts this month by people (like myself) who are a little short on experience, that are having trouble with this device. I think they would do better with a 16F628a / 648a or 16F876 / 877 etc. At least until they get their sealegs.

To some extent that comment may be true but as the 16F88 is so versatile you can use it for many different projects so will quickly learn its quirks.

I was using 16F628 for 18pin projects and 16F877 for 40 pin projects.

I am now using 16F88 and 18F452.

My 40 pin project outgrew the capabilities of the 877 and my reason for getting started with the F88 was because it can be bootloaded. A real boon for developing code

[mister_e]

well well well... there's always a new device... so there's always a new challenge (sort of) or problem.

F88 is probably the new F628(a) for those doing the BIG JUMP from an F84(a). just do a search with 16F628, you'll be surprised how much time me and other repeat CMCON=7

I also appreciate the F88 and it's like all firsts experience... the first time it doesn't work... You have to learn from it. and...read the datasheet A.K.A TFM (The Fabulous Manual)

I don't really have a favourite one... from 10F to 18F and some DsPIC when really needed.