PIC16F84A using pulsout and TMR0

[DragonBall_6]

Hi all,
Thanks for the reply.

Regarding the LCD everyting look fine in my circuit. After power on the, the LCD come 16 small black square on the screen but it does not display "Hello".

Regarding the website that u given to me i'm not very understand. Do you have the simple one and is in the pure PicBasic Pro language. Besides in the website I noticed one things which we can add 2 or more interrupt at the same time..But I go thru this I not really understand.....Thanks

Below is the statement that provide by the mister_e:-

****************too bad PIC16F84a don't have 2 timers... *********
************************************************** ******
I'm planned to use the PIC16F876A there got timer 0 ,1 and 2.

(1) Is that possible using 2 interrupt in a single program.??

(i) One interrupt (tmr0) is for the clock pulse to send to the stepper motor driver
(ii) One interrpt(tmr1) is for the 1 second elapsed.

If the above possible...Does it mean that in the program I need to have two
ON INTERRUPT code..

Please guide me thru this..... Thanks you all very very much........