serin string question

[mister_e]

Bad config fuse setting, 9600 baud, using internal OSC AND with Serout combination??? no big chance that it's going to work.

At least fix your config fuse setting, try with a lower baudrate first and use DEBUG.

Sure it's compile OK probably you're using PM to compile AND those

_CONFIG
_INTRC
_OSC
_NOCLKOUT
_WDT_ON
_PWRTE_ON
_MCLRE_OFF
_BODEN_ON

are considered as Label... not much!

[Archangel]

Bad config fuse setting, 9600 baud, using internal OSC AND with Serout combination??? no big chance that it's going to work.

At least fix your config fuse setting, try with a lower baudrate first and use DEBUG.

Sure it's compile OK probably you're using PM to compile AND those

Hello mister_e,
I compiled with MPASM, and didn't mess with his fuses except to add _ to config.
I tend to agree good luck getting any serout to work with internal osc, but as you see I missed that! Too busy fighting bad internet connection also not familiar with 12F series, look like PIA to me. Glad you are helping him. MY question is, did I do the changes in the serin2 correctly?
JS