Quote Originally Posted by Bruce
The MAX reliable data-rate of the receiver you have is 2400 bps. Everything
you try should be at or below 2400 bps. Over the MAX data-rate is just not
going to produce anything reliable.

I beg to differ! Those modules rock! Even though they're only rated for 2400 bps, I've been using them at 9600 bps with very good reliability (if I had to guess, over 95%), althought 19.2kbps is more like around 50% but it still works!


Have you tried testing your RF modules with the encoder/decoder ICs you
received with your kit yet? That's what we test them with here before kits
ship.
Before moving any farther, I would definitely recommend you validate your RF
modules by testing them with the encoder/decoder ICs you received.
Once you have verified that everything's working, it's a lot easier to move on
from that point.
True, the encoder/decoder modules are handy. I was trying to get him up to that point, but it sounded like he might've had a dead module in the first place. And since he had the 'scope out and was watching it, I figured I might've been able to induce a failure that would duplicate what he might/might not have been doing right or wrong....

Keep at it....we'll get 'er eventually...
JDG