Serout problem

[skimask]

Well a big rule I learn not long ago is to use encoding techniques. and perhaps keep on sending the data a little while longer with serout command.

k

Ok, so as it stands, you have:
TXPIC: one button, 4 leds, serial out on PortB.2
RXPIC: 4 leds, serial in on PortB.5

All works well, data appears to transfer from TXPIC to RXPIC, LEDs match on both, then go out on RXPIC after 5 seconds without button push on TXPIC....

If that's all good....Read on...I'll be typing up the next post while you read this one....
JDG