I will home only tonight.
BUt I did gground pin 6 and 7, there is small wire going from one to the other then ground wire from that to the ground. I removed the antennas because I did not see any difference with or without since I am transmiting very close.
I did reduce the speed down to 2400 but same output.
I am tramsitting 10101010 , why is the 4th 1 is doubled.

On another note, I tried this sending code:
http://www.rentron.com/ruf-bot.htm
with same chip in picbasic and I still did not get a good receiving, Although when I tried it, I had a 4Mhz crystal, maybe adding a 20Mhz, BUt his code do not specidy any, so I assumed default. Could my receiver be busted?

ken