pot command

[keithdoxey]

Sometimes the error messages bear no relation to the actual error.

Try changing serout 2,n9600,(2)

to serout 2,n9600,[2]

[lerameur]

yes thanks,

those french keyboards...

k

[mister_e]

yeah i know what you mean. It's always handy to have English(United State) driver installed too. Just need to press Shift+Alt to switch between language

[Acetronics2]

yes thanks,

those french keyboards...

k

Hi,

For once one can say it's the Keyboard's error ...

Mhhhh, have something against French Goose liver, Sauternes, Camembert, Cognac, ... and so on ...

Ahhhh, I see ... that was just a "glitch" ...

Alain

PS: In French, as I've read here, your should be called " Le Ramier " ... and not "Lerameur" ....
LOL !!!!

[lerameur]

wow shift-alt, thats cool.

I am still confused about one part. The default selection from the compiler is great but very specific for me. Lets say you are using the Pic16F877, with port A, B, C,D,
I then use the command serout, IS there a problem using the exact port?
Ex: serout portC.2,N9600,[3]
instead of 2,N9600,[3] . ( by which I know the pin number, but I dont know the port)
For me it looks like its taking a random port, obviously , the one by default...

ken

[Archangel]

wow shift-alt, thats cool.

I am still confused about one part. The default selection from the compiler is great but very specific for me. Lets say you are using the Pic16F877, with port A, B, C,D,
I then use the command serout, IS there a problem using the exact port?
Ex: serout portC.2,N9600,[3]
instead of 2,N9600,[3] . ( by which I know the pin number, but I dont know the port)
For me it looks like its taking a random port, obviously , the one by default...

ken

Hi Ken,
No it's better to specify PortA or PortB or . . . than just serout 2,N9600. I have only seen serout 2,N9600 used as port B, I think it is a throwback to PBasic and not the pro that still works in Pro,maybe for basic stamps, the PBasic cannot use the Pro sytax which allows you to specify the port. I only use the full name of ports so I do not allow myself to get sloppy, I am not a good enough programmer to ALLOW sloppy, I think generally speaking you can serout on any "I/O" pin which can be made digital, possible exception A.4 or 5 and IT may work with ext. pullup.
Joe

[lerameur]

I was programing in serial and it di dnot work, then I saw another command serout2, decided to use it, and just by adding the 2 it works.. I am only doing one signal, why would this one work and not the other ? using the F88,

serout2 PORTB.2,n9600,[2]

ken