pot command

[Archangel]

yes I am printing them out and carefully reading them now.
But, i am curious, if I wanted to use the POT command, what do i have to do to read from port A?

k

lerameur,
without actually doing it to verify it works . . .as I do not have a 16F88
put the three BOLD commands into your code to make the PortA pins digital and turn off the analog comparators

CMCON=7              ' Disable comparators
ANSEL=0               ' Set port as digital I/O
ADCON1=7
TrisA = %11111111  'sets all port a as input
TrisB = %00000000  ' sets all port b as output
B0 var byte            ' establishes a variable called B
Start:
Pot PortA.2,255,B0           ' would like PortA.2,175,B0 use number to suit you
Lcdout $fe, 1                   'Clear screen
Lcdout $FE,$80,"Pot: ", #B0       'Display the numerical value
Pause 300 
goto start
end

This should work.
JS