Originally Posted by
champion
Yes, its with a F84A, with 10k resistor and a 0.1uF cap.
There is another way.
Use 1K POT with 100nF.
This way, you will get a large movement of the POT giving you softer reading max. "30" instead of 255.
You can then multiply this "30" by say 4 and have "120" as your POT reading value, still with soft reading movement. (multiply by 8 and get 240 could be another).
How is that now?
-----------------------
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
Bookmarks