12 Servo's together does not seem to work, Power problem

Closed Thread
Results 1 to 15 of 15

Hybrid View

  1. - 13th December 2006, 19:13 #1
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Wink Cold shower

    Quote Originally Posted by sayzer
    I knew this was going to come out.
    I was so lazy to draw all 12 servos. Here it is.

    Now, it should make more sense.

    In Figure3, S1 and S12 do not get the same voltage although they are parallel.
    But in Figure4, all servos get equal voltage.


    <img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=1259&d=1166036361 " >

    ------------------------------
    Hi,Sayzer

    Sorry for the cold shower ...

    But the signal pin is ALWAYS at pin 1 or 3 of the connector...

    The two power lines are ALWAYS side by side !!!

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  2. - 13th December 2006, 19:30 #2
    sayzer's Avatar
    sayzer
    sayzer is offline SuperMod
    Join Date
    Jan 2006
    Location
    Istanbul
    Posts
    1,185

    Did you find this post helpful? Yes | No

    Default

    Thanks Alain.

    I corrected the pins in post #10 and #13.

    ------------------------
    Last edited by sayzer; - 13th December 2006 at 19:38.
    "If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
« Previous Thread | Next Thread »

Similar Threads

  1. wierd problem with 12f629 Need Help Despretly
    By Nadeem in forum Off Topic
    Replies: 1
    Last Post: - 15th June 2005, 20:59
  2. 16F628 problem
    By Brown in forum mel PIC BASIC
    Replies: 1
    Last Post: - 6th May 2005, 19:56
  3. Power up problem
    By Ken McDonald in forum General
    Replies: 1
    Last Post: - 28th December 2004, 17:06
  4. weird 12F629/675 problem
    By peterdeco1 in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 7th October 2004, 01:08
  5. power up problem
    By rookieofbasic in forum General
    Replies: 4
    Last Post: - 2nd April 2004, 12:01

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules