using TOCK pin as output?

Results 1 to 6 of 6

Threaded View

  1. - 8th November 2006, 01:44 #3
    droptail's Avatar
    droptail
    droptail is offline Junior Member
    Join Date
    Nov 2004
    Location
    Calabasas, CA
    Posts
    84

    Did you find this post helpful? Yes | No

    Default

    Pin RA4 is multiplexed with the Timer0 module clock
    input to become the RA4/T0CKI pin. The RA4/T0CKI
    pin is a Schmitt Trigger input and an open drain output.
    All other RA port pins have TTL input levels and full
    CMOS output drivers.

    I have to see if the Timer0 module clock input which this pin MUX's with is enabled I believe. I don't know what role the open drain output has if any on the serout?
    Last edited by droptail; - 8th November 2006 at 01:49.
    James
« Previous Thread | Next Thread »

Similar Threads

  1. Is this a K Type sensor?
    By jessey in forum mel PIC BASIC Pro
    Replies: 20
    Last Post: - 21st November 2009, 14:55
  2. Help changing CCP3 output pin
    By ChrisHelvey in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 15th July 2008, 03:30
  3. Microcontroller with 2 way paging application problem
    By oneohthree in forum mel PIC BASIC Pro
    Replies: 30
    Last Post: - 20th April 2007, 18:27
  4. Serious Serial Situation Setbacks...
    By Dansdog in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 7th February 2007, 04:46
  5. Another RTC, DS1287
    By DavidK in forum Code Examples
    Replies: 0
    Last Post: - 12th December 2006, 18:07

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules