Interrupt Or I Am Going To Die

[kunguz]

After removing delayms1000 waiting for interrupt takes much shorter time like 1 sec. And I look with an osiloscope in simultion to the portb.6 which i see is a clear 5V. http://ww1.microchip.com/downloads/e...tes/00566b.pdf after reading this I get the feeling like this circuit did not fit for a small pulse width. Is this the problem or am I doing something wrong in programming

[kunguz]

After using this new code below, I get value of sayi +2 each time I click.

device 16f84a
ON_INTERRUPT goto flash
intcon = %10001000
input portb.6 ' Bu pinleri sıfırladıktan sonra alıcı olarak ayarlamalısın
dim sayi as byte
sayi = 0

loop:
high porta
delayms 200
serout portb.3,16780,[Dec sayi ,13]
goto loop

disable

flash:
MOVF PORTB, W
low porta
intcon.0 = 0
sayi = sayi + 1
CONTEXT RESTORE

end

[sayzer]

Hi Kunguz,

In your code, which you said works, how did you get "HIGH PORTA" or "LOW PORTA" work?


?


-------------------

[kunguz]

May be it's about my IDE ; I am using PROTON SE 1.1.2.8 ,And you can find the working circuit in the attachment with assembly and PICBASIC codes in it.

[mister_e]

Certainely not an IDE problem There's few things in the world want to stay away of. Proton is one of these

[paulvits]

DEFINE LOADER_USED 1
INCLUDE "modedefs.bas"
DEFINE HSER_BAUD 9600
DEFINE HSER_SPBRG 25 'Gebruik deze twee defines 25
dEFINE HSER_TXSTA 24h 'voor HSER met 9600 Baud
OPTION_REG = $7f ' Enable PORTB pullups
ADCON1 = 7 ' Make PORTA and PORTE digital
on interrupt goto myint
INTCON = $88
pause 50
TRISB = %11110000
led var portb.0

start:
pause 5
goto start
'***Start interruptroutine***
disable
myint:

high led
pause 500
low led
INTCON.0=0 'Clear interruptflag
resume
enable
end

[sayzer]

Hi paulvits,

As you can see Kunguz is all fine. He did not die.

What is your question?


-----------------------------

[picnaut]

Certainely not an IDE problem There's few things in the world want to stay away of. Proton is one of these

They said the same thing about planes in the early days of flight. Sometimes progress takes a while to catch on.

[mister_e]

Hey Picnaut

Why i had this feeling you couldn't resist to add your spices?

Are you saying we can fly? Really? Wohooo i missed it?

Is that also true that a man walked on the moon?

Sometimes progress takes a while to catch on.

I'm to old to wait 'till it's going to be at least good... if the day come.

There's a far better tool (not toy) comming up soon. Too bad only for 18Fs... 'till now. Even in pre-release it's already 1E10,000 : 1 better than this Programmer Disaster Software.

Happy for you that you finnaly get your multi I2CBUS. 2 year later but you have it now. That's true, progress takes a while to catch on.