16f628a to 16f88 or 16f819

[savnik]

need to change something in the code;

[savnik]

need to change something in the code which i have , from 16f628a to 16f88 or 16f819.

[mister_e]

we need more information... the existing code and PIC... and the target PIC #

[savnik]

we need more information... the existing code and PIC... and the target PIC #

I have the code for the pic16f628a and work.
I want to replace the 16f628a with 16f88 or 16f819

	DEFINE LCD_DREG	PORTB	    'Selection of the port B
	DEFINE LCD_DBIT 0	    'Selection one RB0 with RB3
	DEFINE LCD_RSREG PORTA	    'RS on port A
	DEFINE LCD_RSBIT 2	    'RS on RA2
	DEFINE LCD_EREG	PORTA        'E on port A
	DEFINE LCD_EBIT 3	    'E on RA3
	DEFINE LCD_BITS 4	    'Mode 4 bits
	DEFINE LCD_LINES 2	    '2 lines

	DEFINE I2C_SCLOUT 1
	
	PAUSE 500
	
' ** DEFINITION OF THE ENTREES - EXITS

' Exits I2C

	SCL var PORTA.1                             ' SCL on RB1 (pine 18)
	SDA	var	PORTA.0		' SDA on RB0 (pin 17)

' Boutons

	UP	    var	PORTB.6		'increase the frequency (on RB6)
	DOWN	var	PORTB.7		'decrease the frequency (on RB7)
	CH_PAS	var	PORTB.5		'Change the step of synth (on RB5) 

	Input	UP			'Up and Down are entries
	Input	DOWN
	Input	CH_PAS

[DynamoBen]

Add the following to the top of the program:

CMCON=%00000111 ' Disable Comparators
ANSEL=%00000000 ' force RB6 and RB7 digital (16F88 specific)

[savnik]

Add the following to the top of the program:

CMCON=%00000111 ' Disable Comparators
ANSEL=%00000000 ' force RB6 and RB7 digital (16F88 specific)

Already have : CMCON = 7 ' PortA = digital I/O