LCD and "count": need to clear LCD?

[sayzer]

If I understood what you wanted to do, this should be it.

RPT:
    Count PORTB.0,1000,CNT
    LCDOUT $fe,1, "Freq.= ", DEC Cnt ' Display count
Goto RPT

Also, no need for PAUSE 1000 because your Count command itself creates 1000ms delay for LCD.


--------------------

[paul borgmeier]

Try somethinbg like this:

LCDOUT "Freq.= ",$FE,$C0,DEC Cnt ' Display count
If Cnt < 100 then LCDOUT " "      ' if Cnt is less than 100 then print a blank
If Cnt < 10 then LCDOUT " "       ' if Cnt is less than 10 then print a blank 
PAUSE 1000