chinese or japanese, it's greek to me
|
chinese or japanese, it's greek to me
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
maybe japaneseOriginally Posted by mister_e
chinese or japanese, it's greek to me
|
now work
I change the pic16f84a with 16f628a and now work OK
why this difference;
my config is
Last edited by savnik; - 21st October 2006 at 12:11.
|
Brown out detect is the answer.
Maybe the power-up timer could help on your grandpa F84. But more than likely, a capacitor between MCLR and gnd will work... have a look to the F84 datasheet. i'm pretty sure they show you some RESET circuit there.
It's no coincidence why most PIC have a Brown-Out detect feature now
I usually set both to ON
Last edited by mister_e; - 21st October 2006 at 20:29.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
I test but no help.
I have capacitor.
The only solution for me is to replace the 16f84a with 16f628a , or to use a MCP100-101
Last edited by savnik; - 21st October 2006 at 21:25.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks