How about the Crystal?
Q1, Q2, Q3?
Possible to have a faulty DB9 cable?
Possible to have some break-link between the DB9 and the circuit?
Broken pins on the dip socket?
|
How about the Crystal?
Q1, Q2, Q3?
Possible to have a faulty DB9 cable?
Possible to have some break-link between the DB9 and the circuit?
Broken pins on the dip socket?
Last edited by mister_e; - 16th October 2006 at 14:54.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Do you have a way to check the com port? You might have a bad port.
|
Or may be they inserted a secret timer/counter inside the programmer to terminate the life of it; and now it is time to buy a new one.
I am a great conspiracy theorist!
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
|
Sorry, I haven't checked the list in a few hours. I replaced the crystal, and checked the com port. I normally get the green light on power up whether it's hooked up to the PC or not. Does the chip do a diagnostic on the transistors on power up?
|
Otay... I spoke to Charles at MElabs. He told me that occasionally, the PIC252 just goes astray. About a dozen have, with no aparent cause. I ordered another chip and will update the list if this works. The board is so simple, I can't believe that it won't.
Thanks for the input,
Ron
|
Received the new PIC controller for the serial programmer. Fired it up, and that did the trick. Thanks for the input.
Ron
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks