melabs usb programmer problem

[bigbear]

ok, I did what you said and now I get an "erase failed" error.

mw

[bigbear]

I had the connector to the programmer in the wrong spot. There is a spot for an exspansion board, and the connection to the programmer, they look the same, and I connected to the wrong one. Stupid mistake.

Thanks for helping anyway, I appreciate it. Your tips led me to the problem.

mw

[picster]

I kept getting this message too, but on the serial programmer. Make SURE your RB7 line (or whatever the ICSP connection is) doesn't have other hardware connected to it. That was my problem.

Picster