10-Bit D to A Converter

Closed Thread
Results 1 to 7 of 7

Hybrid View

  1. - 11th October 2006, 13:32 #1
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Talking new pair of glasses needed

    MAX 531/538/539

    LTC 1451/52/53

    ...

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  2. - 11th October 2006, 22:52 #2
    Atom058's Avatar
    Atom058
    Atom058 is offline Junior Member
    Join Date
    Sep 2006
    Location
    Florida, USA
    Posts
    94

    Did you find this post helpful? Yes | No

    Default

    Hello All - Thanks for all the info. However, I did not see anything that was I2C. I will go to SPI if I have to but I'd rather not - I am going to have 3 of these on a single PIC (F876) and I2C will take up less pins.
  3. - 14th October 2006, 02:14 #3
    Atom058's Avatar
    Atom058
    Atom058 is offline Junior Member
    Join Date
    Sep 2006
    Location
    Florida, USA
    Posts
    94

    Did you find this post helpful? Yes | No

    Default Plan B

    Well, it appears that there is no such beast as a 10-bit, I2C, Dip, D/A converter - I have searched hi and low. I have therefore decided to go the SPI route. I have found a 10-bit, 4 channel, SPI in a DIP package that should work fine for me. It is the MAX5250. Thanks anyway!

    Atom058
« Previous Thread | Next Thread »

Similar Threads

  1. Bits, Bytes Words and Arrays
    By Melanie in forum FAQ - Frequently Asked Questions
    Replies: 24
    Last Post: - 14th June 2016, 07:55
  2. How can I adjust in USBDemo A/D converter from 8 to 10 Bit resolution?
    By Kuba230 in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 31st July 2008, 08:56
  3. PICBasic newbie problem
    By ELCouz in forum mel PIC BASIC Pro
    Replies: 32
    Last Post: - 12th February 2008, 00:55
  4. Need help with 16f819 10 bit ADC
    By bannrikae in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 26th September 2005, 15:20
  5. USART interrupt not interrupting right
    By Morpheus in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 6th March 2005, 01:07

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules