BigWumpus,
Do you have a part number or a particular place where I can purchase a ready made piezo-beeper? thanks.
|
BigWumpus,
Do you have a part number or a particular place where I can purchase a ready made piezo-beeper? thanks.
|
Digisound F/UCW 03 or ...06
PBP 2.50C, MCS+ 3.0.0.5, MPLAB 8, MPASM 5.14, ASIX Presto, PoScope, mE mikroBasic V7.2, PICKIT2
|
Hi everyone,
I finally got a PIC with HPWM. Is there anything else I have to setup aside from the ccp1con? Thanks
|
Which pic is it?
PR2, T2CON are others most likely.
----------------------
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
|
Hi sayzer,
its a 18f1320 with the HPWM without the HPWM 16f88. thanks
|
Hi Gator,
18f1320 has "Enhanced CCP module" which is more complicated then the others.
Also it has four PWM outputs, P1A through P1D, and this makes CCP1CON register more complicated to be set.
It is over my head, and I have zero experience in it. I am eager to learn it though as I will have to work with 6pwm channels soon.
May be our highly experienced members can give you hand on that? and you can post the ongoing progress here...
-----------------------------
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
|
Its finally working. The code (sound command) was right but not sure why it did not work. I changed the output pin and now its working. Thanks for those who have replied. I really appreciate it.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks