Proteus Execute Error

Results 1 to 5 of 5

Threaded View

  1. - 6th October 2006, 08:51 #5
    keithdoxey's Avatar
    keithdoxey
    keithdoxey is offline Senior Member
    Join Date
    Feb 2003
    Posts
    432

    Did you find this post helpful? Yes | No

    Default

    Have you tried asking on the Proteus Support Forum ?

    http://support.labcenter.co.uk/forum/

    Labcenter staff are always on the board so you should get an answer pretty quickly. Although I have been using Proteus since V4.6 I have never used the simulation features. I just use if for ISIS (Schematic) and ARES (PCB Layout). You really need to ask on the proper forum as projects sometimes cant be loaded if they were created in a newer version of Proteus and I am running 6.3 SP2 but the current version is 6.9

    Your problem seems to be a Proteus one rather than PicBasic.
    Last edited by keithdoxey; - 6th October 2006 at 08:55.
    Keith

    www.diyha.co.uk
    www.kat5.tv
« Previous Thread | Next Thread »

Similar Threads

  1. Using input from Switch to control a loop
    By MrRoboto in forum mel PIC BASIC
    Replies: 9
    Last Post: - 2nd February 2009, 05:02
  2. Loop with two motor and 2 sensors
    By MrRoboto in forum mel PIC BASIC
    Replies: 4
    Last Post: - 8th December 2008, 23:40
  3. Optimizing DIV
    By skimask in forum mel PIC BASIC Pro
    Replies: 41
    Last Post: - 22nd September 2008, 04:58
  4. pbp245 compliation error
    By Woodzy in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 25th July 2006, 05:59
  5. 16F88 Compile error
    By Toley00 in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 2nd November 2005, 00:22

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules