Reading a linear hall sensor

[mister_e]

Pulsin may work, Count too, an internal Timer too. I prefer internal timer in counter mode.

Oh BTW, if it was an analog out, you should disable the internal comparator -> CMCON0

[peu]

ok timer or pulsin, either way, how do I know when to stop reading and start counting again?

Im reading another hall efect linear sensor datasheet: http://www.allegromicro.com/datafile/1301.pdf this one looks like more appropiate for my code, but it costs 5x the price of the one Im using

back to the HI300/D1, I don't understand how to read it from the datasheet, which by the way looks very brief.

Can you help me with some metacode on how to read this sensor?

thanks

[mister_e]

Count PORTB.0,100,ByteVar
This will count the pulse on PORTB.0 during 100mSec

You should measure the frequency at the sensor output first.