Trouble with Serin2 and variable size

[Ryan7777]

thank you all for the replys!
You guys sure do love the usart, I'll more than likely be using it, but for now im using serin2. Im using the internal osc and i was told the USART can cause problems if running at 4mHz, also i dont feel like extra hardware while just playing around on the breadboard.. (i.e Xtal, MAX232 and all the caps... ) but i will keep it in mind when i move on to building something final. also dont need the time out yet, im still trying to get a grasp on the code at hand, there wouldnt be anywhere to jump to atm... the following code is working as before, (T.Y. Ben) i still get garbage after my text like:

hello█ █ █ █ █ █ █ █ █ █ █ █ █ █

which im guessing is the leftover array bytes all set to zero, which is a predefined character in my LCD which happens to be a big black block with some of its upper pixels missing (?) any idea's how to get around that? (getting rid of holder = 0 does nothing, still get the same result)

also if i do what Darrel says, what do i send the PIC? could you give me an example of what i should be sending it, and what will come out on my LCD?
maybe $48,$45,$4C,$4C$4F (hello)?


holder VAR BYTE[20]
LCDOUT $FE, 1
PAUSE 1000

main:
holder = 0
SERIN2 PORTB.0, 16780, [ str holder\20\13]
LCDOUT $FE,1, STR holder\20
PAUSE 2000

goto main:

BS2p Pbasic Code:

Start:
SEROUT 0,17405, ["hello",13]
PAUSE 1000
GOTO Start:

[DynamoBen]

A couple of things about what you have.

First off holder=0 doesn't really do anything. I would suspect you were hoping it would make all the bytes 0 in the array. That isn't the case. You would need to create a loop that places a zero in each byte of the array. Second, you don't have a timeout. Without a timeout, you run the real possibility the code will stall.

I altered the code to address some of the issues you are running into. Keep in mind there are a least 3 different ways (maybe more) to accomplish what you are asking. It’s really a matter of style and application, neither of which I can decide for you. In this version of the code, I added length and command. Command handles the command portion of LCDOut (see manual). Length tells the string command when to stop. This should eliminate the blocks. Using this approach, you need to expand the string you are sending from the stamp. (See below) If you didn’t want to specify a length you would need to create a loop to collect the data byte by byte and then use the terminating character that was in the code before. Here again both work, it depends on style and application. Enjoy.

Holder var byte[20]
Length var byte
Command var byte

main:
serin2 PORTB.0, 16780, Data_Error,[Command, Length ,STR holder\20\Length] 
LCDOUT $FE,Command, STR holder\Length
goto main

BS2p Pbasic Code:

Start:
SEROUT 0,17405, [1,5,"hello"]  ‘ 1=LCD Clear, 5=Length of hello
PAUSE 1000
GOTO Start

In regards to HSERIN, like the rest of us you will eventually run into a problem and you will need to use hserin to solve it. Usually this occurs when your code starts doing other things and polling for serial data becomes impractical. We all get there at some point.