CDLite mpasm case sensitive

[mister_e]

Or you change CDLite to MicroCode Studio. In this one, you can do it inside the IDe using the menu

[DynamoBen]

I've tried all kinds of different combinations and I can't get it to work.

The root cause is I'm using mpasm and ASM commands in my code. CDLite changes ASM to Asm, this makes mpasm throw and error.

I can't switch to microcode because I'm using a 16f876A and I don't have the cash flow right now to purchase plus.

[Darrel Taylor]

Have you tried this command line?

-ampasmwin -oq -c

.

[DynamoBen]

Indeed I did.

I also tried

-ampasmwin -oq -oc

-ampasmwin -oq /c-

and moved things around quite a bit.

[sayzer]

....I don't have the cash flow right now to purchase plus.

I chose to make no comment there. You are too honest DynamoBen!

[Darrel Taylor]

Interesting, I couldn't get the command line to work either. Even though it says how to do it in the help file.

Well, here's a couple alternatives.

In the same folder as mpasmwin.exe, open the MPLAB.INI file and modify or add this line.

CaseSensitive=OFF

-- or --

Start the MPASMWIN program directly by clicking on it in windows explorer, or type MPASMWIN from a DOS window.

Unselect the "case sensitive" checkbox then click "Exit".

Then try to compile again.

HTH,

[Darrel Taylor]

Sorry, I guess that doesn't work either. Doh!

I've found that the /c- option does work when you provide it directly to MPASMWIN.EXE. But it doesn't seem to be passed on by PBPW.

You might be able to create a batch file to do the compiling. Or use MPLAB instead of CDlite. But you'll need to install the PicBasic Interface to MPLAB. It's on the meLabs website as I recall, been awhile since I did that.

http://www.melabs.com/support/mplab.htm

.

[DynamoBen]

You and I are thinking the same way. In the end there should be no reason why this shouldn't work.

I can try MPLAB.

I really think someone needs to work on a free or opensource IDE for PicBasic, or one should be included. Microcode is great but $75 is steep, considering PBP is $250 on its own. Needless to say this becomes and expensive hobby when you add things together. All this to blink an LED.

[Darrel Taylor]

Does $49.95 sound any better?

http://www.rentron.com/PicBasic/prod...ode_Studio.htm

MPLAB is as cheap as it gets. Free. It takes a little getting used to. But it does the job. Just no code highlighting.

The simulator can be handy too. No PIC required.
.