Negative numbers

[sayzer]

Hi RUBiksCUbe,

Where do you get this "Remaining" variable into negative? Are you setting it to "negative" somewhere before this loop as you stated in the example above?


Also, here I made the same code of yours in a different look.
It seems you only need the negative value for " messageScroll[writePos] = $0 "

for i = remaining to remaining + (rows - 1)

    if i < 0 then 
        messageScroll[writePos] = $0

    else

        if i < messagelength then 
           messageScroll[writePos] = message[i]
        else
           messageScroll[writepos] = $0
        endif

    endif

    writePos = writePos + 1


next i

Also, are you setting other variables to an initial value at the beginning?






--------------------------

[RUBiksCUbe]

At the very beginning I have

rows = 8
remaining = (0 - rows)

[Darrel Taylor]

Couple problems here.

As Sayzer pointed out ... "...Keep in mind that all of the math and comparisons in PBP are unsigned."

This means that

if i < 0 then

will always evaluate to FALSE. And the FOR loop will always terminate before executing anything because -8 is really 248 in PBP math (assuming byte vars).

You'll need to find positive numbers to work with.

[mister_e]

Or testing the MSB of the variable. If 1=> negative if 0=>positive.

[precision]

I make load indicator with loadcell, i using pic 16f877. For 16 bit adc i using cd4066 , value from -65535 to +65535 with peak hold

I setup - reading

B0 var word ( reading of adc )
B1 var word
B2 var byte

main: if B0 > 0 then ( B1 = B0 ) and ( B2 = 43 ) ' 43 is + sign
if B0 < 0 then B1 = ( 65535 - B0 ) and ( B2 = 45 ) '45 is - sign

lcdout $fe,1
lcdout " Load ", B2, dec5 B1

[sayzer]

....

main: if B0 > 0 then ( B1 = B0 ) and ( B2 = 43 ) ' 43 is + sign
if B0 < 0 then B1 = ( 65535 - B0 ) and ( B2 = 45 ) '45 is - sign
...

Hi precision,

Your IF statements are not precise

You should correct them as follows.

if B0 > 0 then 
 B1 = B0 
 B2 = 43
endif

if B0 < 0 then 
 B1 = 65535 - B0
 B2 = 45 
endif

B0 never equals to zero?

This is actually the idea of assigning a flag that will indicate negative status.
That is why I asked above, will you use this negative number in a math operation.

You can have a flag, like NegFlag=1 meaning you have the negative value, and NegFlag=0 meaning positive value.

If of course it can be useful in your case.