PortA , PortB

[BobK]

Hi DiGGi,

It usually depends on what's in the data sheet for the particular PIC you are using. These are something like: ADCON1 = 7 to disable the analog inputs and make the pins digital and CMCON = 7 to disable the comparators. There is a section in the PIC datasheet for each of these 2 items. Go to www.microchip.com and in the search field enter the part number you want a manual for. example: PIC16F628. This will give you selections on all the available documents for that part.

ADCON1 and CMCON are then placed in your initialization section of your program.

Please bear in mind that PICs that have analog ports don't necessarily have comparators. This is why you need to have the datasheet handy to refer to.

BobK

[DiGGi]

Hi,
fiorst ThX for your help, but in my data sheet there is no ADCON1 and CMCON.

is there an other solution , for PIC16F627A?

Diggi

[mister_e]

Ok i do a try, PicBasic is far different from PBP...

try

POKE $1F,7 ' disable comparator

refer to figure 4-2 of the datasheet for the memory map, and section 10 for the comparator module

About 'Pin' Statement... i guess it's valid but i can't confirm how and why... time for me to purchase PBC. I hate to guess..

[DiGGi]

hi

Thank you both.

@paul borgmeier, yes i know but i want to read the pin states seperately

@mister_e the command you sent is working in PB but how can i controle the Pins on PortA with comands like Button/Pin ?

Dirk

[paul borgmeier]

@paul borgmeier, yes i know but i want to read the pin states seperately

Not tried but should work

poke $85, $04	' make RA2 an input 
...
peek $05, B0	' read all of PORTA
B0=B0 & $04	' isolate bit 2
IF B0 = 0 then TurnOFF
do something here if B0 = 1
goto IFEXIT
TurnOFF:
do something  here if B0 = 0
IFEXIT:
...

[mister_e]

Edit: nevermind... too late

[BobK]

Hi DiGGi,

What has been said to you in the last few replies has been correct. If you want to get real basic here you can read porta like this:

Peek PortA, B0 Read PortA and put results in Variable B0
If Bit0 = 1 then task 1 'Reads PortA pin 0, if 1 then goto task 1
If Bit1 = 1 then task 2 'Reads PortA pin 1, if 1 then goto task 2
If Bit2 = 0 then task 3 'Reads PortA pin 2, if 1 then goto task 3

This is really the basic way I started. You can do the BITWISE operations like Paul was showing you also. Whatever you are comfortable with.

Variable B0 now represents a reading of the pins on PortA. you can now look at each pin individually.

Do you have a copy of the PBC manual? If not goto www.melabs.com and download a copy. There is a 2 page explanation on PEEK and a small explanation of POKE.

BobK

[paul borgmeier]

i guess it's valid but i can't confirm how and why... time for me to purchase PBC. I hate to guess..

Hi Steve,
No need to buy PBC or guess - the manual is free online on MELABs site.

http://www.melabs.com/resources/index.htm#Manuals

[DiGGi]

hi

The text in '2.2. The Pins' chapter says that PIN, Button - Commands only work on PortB. That is annoying.

If I would use PEEK the stats of every pin would be written in a var.
E.G. Pin 4 and Pin 6 are high , tha var would look like %01010000.
Is that right?

[paul borgmeier]

If I would use PEEK the stats of every pin would be written in a var.
E.G. Pin 4 and Pin 6 are high , tha var would look like %01010000.
Is that right?

Yes - BITWISE operate to find what you want. See the LET command for more in the PBC manual and my example above your last post.

[DiGGi]

Thanks a lot @ all
I'll try this suggestion and i'll let you know the result.

Dirk