Quote Originally Posted by smitty505000
So I checked the outputs of the encoders with a logic probe. I am getting a high/low pulse out of each of the channels when they are rotated.
What voltage do they output on the channels? I haven't hacked any mouse encoders, so a google on that (or someone else on this forum who has could chime in) could help make sure the hardware portion is working properly.

I do know the code is working now. I scared up 2 mech encoders, and hooked them up to an 18F4620 I have. Using the internal pull-ups on port B, worked without a hitch. I see no reason it wouldn't work on the 16F628.

Steve