capture/repeat data ?

[DynamoBen]

I would never lead someone astray when it comes to OBDII

Post your data so we can get you rolling. I'm as interested as you are.

[precision]

You need all codes and error code to control with pic, download all codes

http://www.troublecodes.net/technical/
http://www.obd-2.de/down.html
http://www.planetfall.com/~jeff/obdii/
http://www.ems-tuning.nl/

[DynamoBen]

precision it seems you didn't read through the entire thread. He is not trying to read OBDII error codes from the ECU, thats easy. He is trying to control devices on the VPW data buss, a little more difficult task; but it is well in hand.

[Sam]

DynamoBen,
should I post the data in hex or ascii or both ?

[DynamoBen]

Hex first.

[Sam]

OK,
Here it is.
Again, I want to be able to program a PIC to,for example, fold mirrors in when a pin goes high. Just don't know where to start ???



MIRROR FOLD IN:

02
06 03 00 0B
12 00 40
21 26
20 91 00
20 D8 00
06
06 03 00 0B
51
20 D8 00
30 01 01 16 02 12 01 17
0C B3 00
06 98
06 98
30 04 01 0C 02 10 01 0D
20 D8 00
05 B3 00 00
85 00
05 00
05 B3 00 00
20 D8 00
20 D8 00
20 D8 00
20 D8 00
20 D8 00

MIRROR FOLD OUT:

02
06 03 00 0B
86 1E
21 26
20 91 00
20 D8 00
07 02
47
61 22
06 00
20 D8 00
30 01 01 16 02 12 01 17
06
06 03 00 0B
06 98
30 04 01 0C 02 10 01 0D
20 D8 00
05 B3 00 00
05 B3 00 00
20 D8 00
20 D8 00
20 D8 00
20 D8 00
20 D8 00

[DynamoBen]

I need you at do an ATH1, then ATMA. Then fold the mirrors.