Toni,
as mentioned earlier, I have had the same problem with the 18F series.
(on the 16F series DATA works just fine)
I have solved it by updating all my tools to the latest versions.
see:
http://www.picbasic.co.uk/forum/show...=&threadid=255
To me it looks like the results one gets depend on the combination of tools you are using. (MPASM, Programmer-Software, etc.)
It's not just the version of PBP.
in PBP 2.44 (or higher) "DATA" is supposed to work but it does not really (at least not on the 18F)
In the thread mentioned above I have described some kind of "workaround", have you tried this ?
--------------------------------------------------------------
There appear to be 10 types of Forum members:
The ones having that problem
and the ones not having that problem
Bookmarks