18f452 internal eprom help


Closed Thread
Results 1 to 14 of 14

Hybrid View

  1. #1


    Did you find this post helpful? Yes | No

    Default

    data @0 232,003,208,007,184,011

    I calculate these as follows:

    1000 dec = 0000 0011 1110 1000 bin

    003 dec = 0000 0011 (byte1)
    232 dec = 1110 1000 (byte0)

    2000 dec = 0000 0111 1101 0000 bin

    007 dec = 0000 0111 bin (byte1)
    208 dec = 1101 0000 bin (byte0)

    3000 dec = 0000 1011 1011 1000 bin

    011 dec = 0000 1011 bin (byte1)
    184 dec = 1011 1000 bin (byte0)

    Hope this helps
    Last edited by CocaColaKid; - 1st June 2004 at 17:08.

Similar Threads

  1. 12F683 internal pull up
    By hvacrtech in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 27th July 2008, 03:35
  2. Pic 16 F877 to 18F452...?
    By turkuaz in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 31st October 2007, 16:54
  3. Changing declared variables names on the fly
    By jessey in forum mel PIC BASIC Pro
    Replies: 15
    Last Post: - 16th December 2006, 07:34
  4. I have a problem with read from internal eprom
    By don_mathew in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 22nd September 2006, 01:48
  5. PIC12F675, accuracy of baud rate with Internal Oscillator
    By Chris Mayhew in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 31st August 2005, 23:41

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts