I know of no bootloader combo that will work over an XPORT. I tried uChip's but that doesn't work because it requires a third wire to trigger it. I suppose that with a little re-coding it might be possible to use it.

When I tried MCLoader, I used a serial -> Ethernet utility to telnet into the XPORT. I'm supposing that is the method you tried as well.

My guess is that the only way to make MCLoader work with this setup would be to disassemble it and modify the timing loops. In an attempt to avoid that mess, I contacted Mecanique and asked if they would be interested in modifying their code, or licensing the source so that I could do it. They said they weren't interested in either one.



Check my private msg to you.