Quote Originally Posted by mister_e
Experience, internet and forum is usually better than any books. Unfortunately it create also lazy people.

One great example is some student on various forum who ask for copy/paste solution... Woooohooo ! Sure they may got their grade even if they don't have a clue of what they do... sad really sad. And that's we call evolution
Well that wasnt me! lol

I'm not that bad, but I must admit I have asked a few questions that could have been answered by a few hours of book searching, I'm rushing this little project through so I have to say thanks to all who have made suggestions.

If I had to write this in 'real basic' it would have took about 30 minutes to flesh out and an hour or two to add refinement.

But when I get this done, I'll be posting the whole thing on here for all those others who want a simple phone controlled house/car/boat/garage alarm.

Features on this not on others are....

V1 will/has
1) incoming phone number verification (5 max, master, slave, 3 peasants)
2) has output ports. (IE turn on lights, unlock doors)
3) has 'levels' of input for alarm (eg, door rattled is a low priority alarm, FIRE is a high)
4) ability to add / delete users without a PC
5) temp monitoring (upto 8 zones) (via ds16/ds18 hardware)
6) voltage monitoring (resistor divider)

V2 additions
7) USB connection to PC to read messages stored in phone
8) A PC side frontend to control it / configure it / send receive msgs

Hardware is 1 pic16f88 (2550 for V2) and a T68 / t681 / t610

Phone was chosen because (a) I have a t68 and a t610 (b) those phones were very commoon so are cheap anywhere on ebay and they dont need silly cables to make them run AT commands.