Wiegand data and com port

Closed Thread
Results 1 to 40 of 54

Hybrid View

  1. - 2nd March 2007, 17:42 #1
    Felch's Avatar
    Felch
    Felch is offline Junior Member
    Join Date
    Sep 2004
    Location
    Tallinn, Estonia
    Posts
    42

    Did you find this post helpful? Yes | No

    Default

    Hi!
    No, this project uses wiegand but circuit was from another code, that read magnetic stripe format. Actually i think it is possible to make the code autodetecting but...never tried it. Yet...
  2. - 3rd March 2007, 02:38 #2
    hkwkok's Avatar
    hkwkok
    hkwkok is offline Junior Member
    Join Date
    Mar 2007
    Posts
    6

    Did you find this post helpful? Yes | No

    Default

    Yes, i found the asm file which indicated the GPIO5 connected to D0 and GPIO4 connected to D1, unfortunately, this project doesn't have the rs232 output to computer for card # display.

    Anyway, i will try to modify the proximity.asm for 36bit wiegand, hopefully, i can make it work, but i need a lot of study.

    Thanks,

    William
« Previous Thread | Next Thread »

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules