Making RA6 (OSC2) an output on a 18F2525

Results 1 to 4 of 4

Threaded View

  1. - 17th August 2006, 18:43 #2
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    you'll have no other choice than alter config fuses using methods stated in the following thread...
    http://www.picbasic.co.uk/forum/showthread.php?t=543

    OR set them manually before programming your PIC.

    Also, read the OSCCON section. page 30 table 2-2 to change the 1MHZ default speed in case you want to use the internal OSC instead.
    Last edited by mister_e; - 17th August 2006 at 18:57.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
« Previous Thread | Next Thread »

Similar Threads

  1. Help changing CCP3 output pin
    By ChrisHelvey in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 15th July 2008, 03:30
  2. Bit Banging input to output on PIC16F876A
    By Bronurstomp in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 26th June 2008, 20:50
  3. Serious Serial Situation Setbacks...
    By Dansdog in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 7th February 2007, 04:46
  4. Using LEDs as light sensors
    By skimask in forum Code Examples
    Replies: 3
    Last Post: - 30th December 2006, 23:19
  5. HSEROUT Newbie question/problem
    By Mark Scotford in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 11th July 2006, 15:44

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules