Not bad, I tried this one and it worked, had problems with the LCD grounding but the code was good, this code is also suitable for many other temp sensors.
|
Not bad, I tried this one and it worked, had problems with the LCD grounding but the code was good, this code is also suitable for many other temp sensors.
|
It's possible to pull the i2c bus and put the mcp9803 temp sensor far away from controller ?(Around 2 meters by using shielded cable)
Thanks.
|
Hello *
I connect MCP9801 to the PIC and i put the 3 Adressline to VCC (A0,A1,A2)
So i change onliy the 2 Lines of the Programm above:
adr_R con %10011111 ;adr mpc9803 read Adresse 111
adr_W CON %10011110 ;adr mpc9803 write Adresse 111
I get always 16.0 C on the display.
Thank for feedback.
Rolf
|
The sensor is 16C?Originally Posted by Omalik
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks