sms to control pic..pls help...

[Ziki]

hi...i'm facing some problem ....when i use hyperterminal ...i got no problem ...can receive and send sms but when i connect it to my uC . it canot work ...must the phone go thrught a max232 when connect to uC?? i'm using t610
pls help..thx alot ....

[f_lez]

I connected t610 (and t68i) to pic 16f88, no max232, no resistors, just wire.

look at picture above, pic on dev board, connected to phone.

[Ziki]

hi ....i finally suceed in trasmitting part( uC to "tell" GSM phone to send a sms )
now i workin on receiveing part(uC to accept information from GSM phone )before this i was using ATMEL ..with BASCOM ..but don't no why it canot work ...spend a week in lab but no result ...

now for the PIC ..which should i use ?
Hserin or Serin or Serin 2

if u don't mind ...can pls share some code example here ..
thx alot ....

[f_lez]

now for the PIC ..which should i use ?
Hserin or Serin or Serin 2

if u don't mind ...can pls share some code example here ..
thx alot ....

I used serin, no reason except I always worked with the f84 and just carried on!

I can let you have my code, you can do with it what you will, its really poorly written and just banged together.

Its unfinished, in fact not done anything with it in about 3 weeks so will take me a day to get back in to it!

Problem was the project was drafted out in my head to use a 2550 for a gsm equipped car alarm, but I only had a f88 to hand, so started on that, idea was I could just recompile the code / cut and paste the routines, then it went off in a different direction as a cut down version of the project using a f88 as a garage/house/boat/shed, so has some features not now needed and ones not yet done.......

http://homepage.ntlworld.com/tinabriddon/pic/

Its a real work in progress........

[Ziki]

thx for the code....can you have a look at this ...

DEFINE OSC 8
DEFINE HSER_TXSTA 24h
DEFINE HSER_RCSTA 90h
DEFINE HSER_BAUD 9600
DEFINE HSER_SPBRG 129
DEFINE HSER_CLROERR 1

sms:

HSEROUT ["AT" ,13,10]
hserin 5000,sms,[WAIT("OK")]


HSEROUT ["AT+CMGF=1" ,13,10]
hserin 5000,sms,[WAIT("OK")]


HSEROUT ["AT+CMGS=",34,"my number ",34,13,10]
hserin 5000,sms,[WAIT(">")]


HSEROUT ["BUTTON HAS BEEN",26,13,10]
pause 5000

end


it doesn't work (canot send sms ) ..but if i just use hserout and use pause instead of hserin .it work perfectly ...so...the problem must be at the hserin .
i try using 4 Mhz and lower baud rate ..also canot work ..
is there any problem in my code ??? thzzzz

[Ziki]

hi ..i also try out with this code ..also canot work....

include "modedefs.bas"
DEfine OSC 4

sms:
pause 1000

serout portb.6,t1200,["atz",13] ' wake up thephone
serin portb.7,t1200,5000,sms,["OK"]

serout portb.6,t1200,["at+cmgs=19",13]
serin portb.7,t1200,5000,sms,[">"]


serout portb.6,t1200,["07910621000010F511000B910621297767F80000AA05E8329 BFD06",26,13]
pause 9000

end


as usual this code work fine with pause instead of serin command ..it suppose to send out a "hello " sms
what have i done wrong ????pls help ..thx ...

[Ziki]

hi ..the problem from the previous tread have solved
now ..i'm having problem storing those valur to my array
below are my code


sms:
include "modedefs.bas"
DEfine OSC 4
buffer var byte(90)
z var byte
TRISB= %10001011

serout portb.6,t1200,["atz",13]
serin portb.7,t1200,5000,sms,["OK"]
pause 2000

serout portb.6,t1200,["at+cpms=",34,"me",34,13]
serin portb.7,t1200,5000,sms,["CPMS"]
pause 2000

serout portb.6,t1200,["at+cmgr=1",13]

for z=1 to 90
serin portb.7,t1200,5000,sms,buffer(z)
next

end

this code canot work ....is it possible to store everting in a array ?..i don't know how to filter out those unwanted ones....