If it works like the 8722, when you load the bootloader in the chip, you can set the config fuses so that the PLL is enabled. The 1Mhz default will be multiplied by 4, giving you the 4Mhz you want.
|
If it works like the 8722, when you load the bootloader in the chip, you can set the config fuses so that the PLL is enabled. The 1Mhz default will be multiplied by 4, giving you the 4Mhz you want.
Charles Linquist
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks