Hello Again,

OK. I've just read your previous post and the responses to it.

$200 USD?

For what you want done, I don't think I could do it for less than $1000 USD. I'd need to get more information on the final product, production volume, desired profit margin, and desired time to market. This all impacts the design which could increase what I will charge to do this.

For $1000 USD, you'll get the following:

Embedded Code
============
The initial release of the embedded code to your specification.
NOTE: The specification must be clearly laid out and agreed upon.


Circuit Design
==========
I would design the circuit but you would need to transfer the PDF version of my schematic to your chosen schematic capture program "and" lay out the PCB yourself.


Support & Enhancements
==================
You'd receive technical support and enhancements from me up to 3 months from the initial release OR up to %10 of the labour (hours spent on development) of the intitial release. Anything after this point would need to be negotiated. I will keep an accurate record of the hours that I spend on this project.


So, it's up to you.

Send me an email.

Picnaut