I want to read the pulse of a bobbin (motorbike) and after to drive the ignition, but i don't know how.
I have pic 16f84a-16f28a-16876-1877
I want to read the pulse of a bobbin (motorbike) and after to drive the ignition, but i don't know how.
I have pic 16f84a-16f28a-16876-1877
That is real-time processing ... and you'd better forget PBP for that !!!
Without some assembler lines, it will be very, very, very difficult to design something practical.
have a look here : http://www.transmic.net/index.htm
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
And for the non french click on the 'Le CDI universel avec uproc PIC16F628' link
or http://www.transmic.net/gb16628.htm
The asm stuff would help OR you increase the OSC speed... but how much will be enough? hard to say. nothing is impossible so far with PBP.
Last edited by mister_e; - 12th July 2006 at 20:51.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Bookmarks