On_Off

[schu4647]

flag var bit
flag = 0

start:
If portb.0 = 1 and flag=0 then
portb.1 = 1
flag = 1
pause 1000
endif

if portb.0 = 1 and flag=1 then
portb.1=0
flag = 0
pause 1000
endif
goto start

The endif should not have had a space in it. I also didn't meand the LED would flash. The pause is so it won't flash.

[mister_e]

<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=390&d=1122866228">from what i understand...

IF PORTB.0=0 then
    TOGGLE PORTB.1
    WHILE PORTB.0=0 : Wend : pause 50
    ENDIF

[schu4647]

That is good and simple, but does it debounce the switch.

[schu4647]

I didn't even realize that toggle command was in there. I that case I could change my code to:

input portb.0

start:
If portb.0 = 1 then
toggle portb.1
pause 1000
endif
goto start

I still think you need the pause of at least a second. Otherwise the light will pulse when you are holding the button. You need a delay to allow the user to remove there finger.

[mister_e]

both will work, mine just sit there until the button is release, then it allow a 50mSec of debouncing delay.

[Leonardo]

Hello friends,

What I want is this:

If RB0 is 0 RB1 is ON and IF RB0 is 1 RB0 is off , every time that presses the led it should change state.

Thank you

both will work, mine just sit there until the button is release, then it allow a 50mSec of debouncing delay.

[mister_e]

PORTB.1=~PORTB.0

in a loop it have to work.