There's a Microchip App Note that gives a very concise explanation of triacs.
|
There's a Microchip App Note that gives a very concise explanation of triacs.
|
Thank you for all the help. You said something that really cleared it up for me when you said the triac turns off at zero voltage. That made me realize the need for detecting the zero crossing is to get an accurate reference every time. If you didn't do it, you may turn on the triac at the beginning of the cycle the first time, and the next time you would turn it on in the middle which would cause the light to flicker. I didn't realize that I was not using the PWM command, but using the 60Hz to creat my own PWM. Let me know if this is correct thinking. At 60Hz the period is 16.6 ms. This means that it is positive for 8.3ms and negative for 8.3 ms. I would then detect the zero crossing and turn on the triac for a certain time. If i turn it on for 4.15 ms I would have a 50% duty cycle or about 60 volts at my bulb. Without the zero detection Part of my on time could be the zero voltage, which would significantly drop the 60 volts and cause a flicker.
|
I think I finally get it. That documentation was awsome along with TB049 from microchips application notes. A Triac is a latching device. You only need a small pulse from the micro to turn it on, and then it latches until the zero voltage event. I was thinking about it oppisite. I thought I would turn it on at the beginning for the cycle, but that would keep it on the entire time. I need to turn it on at some point mid cycle. Going back to my previoius post if I want a 50% duty cycle I detect the zero crossing, wait 4.15ms and then turn on the triac. It would then stay on for the remainder of the cycle. I think this all makes sense now. I will have to experiment. Hopefully I won't electrocute myself.
|
It is possible to reverse the turn-on/turn-off sequence by using an IGBT instead of a triac. Search Google on "IGBT dimmer".
|
IGBT have good advantage.. reducing lamp buzz, reducing the noise the AC line, and and, and... but if my memory is good they need to drive in DC... another Bridge needed.
What's best? It's up to you to decide.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
After these nice explanations above, some schematics would be very nice (including IGBT thingy).
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
|
And that's why I suggested Google.Originally Posted by sayzer
I already cited a Microchip app note for triacs. There's an ST app note for an IGBT dimmer.
Last edited by dhouston; - 30th June 2006 at 12:31.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks