Picbasic pro help please + hardware suggestions

[tsteele]

Hi Luciano

Wow, this looks like a good device, I will try and find a uk supplier and get a sample ordered, Looking at the datasheet, the io to the device can be run at speed so maybe running the pic at 20mhz, there may be time to parse the data as it comes in, there is then less to write out at the end of each line.
thansk again for the info, .

Regards
Ffr

[Luciano]

Hi,

A package you can solder by hand.

Remember that these parts need a 3V supply.
The data lines are 5V tolerant and do not require voltage translation.

Best regards,

Luciano

* * *

Package 28R (See datasheet page 34 and 38).

(28-lead, 0.330" Body Width, Plastic Gull Wing Small Outline Package SOIC)

Ordering code: AT45DB321C-RU
Operation Range: Industrial (-40C to +85C)

* * *

Where you can buy:
(Note that the minimum Order is 25 euro).
http://www.trade-shop.de/catalog/index.php?language=en

Link to AT45DBxxx:
http://www.trade-shop.de/catalog/ind...cPath=72_35_86
(The SOIC package is the AT45DB321C-RU).

Link to AT45DB321C-RU:
http://www.trade-shop.de/catalog/pro...a7950148d6d3d8

[tsteele]

Devices have been ordered, am away for two weeks on vacation, soon as I am back, the project will start.......
Thanks once again for the help.

Regards
Tony

[SteveB]

Tony and Luciano,

Either of you get one of the ATMEL AT45DB321C to work?

Steve B