blainecf,
I am not sure this will work like you expect. When you declare an array variable, it is acually pointing to a series of consecutive RAM addresses. So later, when you use the variable, it goes to the address and uses the value currently at that address. What you are looking to do is create an array that is actually pointing to the addresses represented by the individual pins (which are not even consecutive).

After playing with it a little and looking at the .lst file, I don't know if this can be done in PBP. Once you have created the array, any further references to the array are modifying/reading the contents, not the address. The only info in the manual I see is assigning a label to a specifc pin. Which is handled using different ASM commands.

Maybe one of the real gurus could chime in here and set me straight if I'm wrong (Melanie? Darrel?). Or provide a workaround to do the job.

Hope to get a better answer,
Steve