problem with picall

Closed Thread
Results 1 to 11 of 11

Hybrid View

  1. - 13th June 2006, 12:45 #1
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Question Update ???

    Hi,

    Did you have checked current version here ??? :

    http://picallw.feniks-pro.com/

    Alain
    Last edited by Acetronics2; - 13th June 2006 at 12:49.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  2. - 14th June 2006, 10:53 #2
    Darrenmac's Avatar
    Darrenmac
    Darrenmac is offline Junior Member
    Join Date
    Mar 2004
    Posts
    74

    Did you find this post helpful? Yes | No

    Default

    Thanks, But the latest version that is there is the one I have that is giving me problems
  3. - 15th June 2006, 00:28 #3
    Darrenmac's Avatar
    Darrenmac
    Darrenmac is offline Junior Member
    Join Date
    Mar 2004
    Posts
    74

    Did you find this post helpful? Yes | No

    Default

    Does anyone know of other software that works with the p16pro40 programmer, so then I can determine if it is a software problem or hardware problem. A simple programming circuit that will work on picallw in place of the p16pro40 programmer would also help.
  4. - 16th June 2006, 01:06 #4
    Archilochus's Avatar
    Archilochus
    Archilochus is offline Member
    Join Date
    May 2004
    Location
    New England
    Posts
    164

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Darrenmac
    Does anyone know of other software that works with the p16pro40 programmer, so then I can determine if it is a software problem or hardware problem. A simple programming circuit that will work on picallw in place of the p16pro40 programmer would also help.
    I used picall when programming 16F628's and it worked fine - then when I tried 16F87x or any of the "A" suffix devices it just would not work.
    I've been using WinPicProg by Nigel Goodwin - works fine with my pic16pro40 programmer:

    http://www.winpicprog.co.uk/

    Note that updates for new devices are infrequent - check the list of supported devices to see if it includes those you want to use.
    "Data sheets? I ain't got no data sheets. I don't need no data sheets. I don't have to read any stinking data sheets!"
  5. - 18th June 2006, 00:23 #5
    Darrenmac's Avatar
    Darrenmac
    Darrenmac is offline Junior Member
    Join Date
    Mar 2004
    Posts
    74

    Did you find this post helpful? Yes | No

    Default

    Just tried WinPicProg but i get an error when i try to load a hex file. It seems to communicate ok to read the pic but when i load a file that i have already writen i get the following, "Access violation at address 004636E0 in module 'WinPicProg.exe'. Read of address 00000000". Ihave installed the port drivers and re started but still get this message. Any ideas?
  6. - 18th June 2006, 18:37 #6
    Archilochus's Avatar
    Archilochus
    Archilochus is offline Member
    Join Date
    May 2004
    Location
    New England
    Posts
    164

    Did you find this post helpful? Yes | No

    Default

    Don't know about that as I've had no problems so far (windoze XP 'Home edition).
    There are some 'fixes' given at the site for various problems. There is also a user forum (the lack of messages there is due to the fact that all the old ones were lost when they changed servers).

    Arch
    "Data sheets? I ain't got no data sheets. I don't need no data sheets. I don't have to read any stinking data sheets!"
  7. - 25th June 2006, 18:46 #7
    ChrisMicro's Avatar
    ChrisMicro
    ChrisMicro is offline Junior Member
    Join Date
    Oct 2005
    Posts
    34

    Did you find this post helpful? Yes | No

    Talking Pic all

    I am instaling Picall on Windows Exstra Problems now for the first time, it was working well on Windows My Edition(ME) without any problems I will let you know if the problem is only with XP.
« Previous Thread | Next Thread »

Similar Threads

  1. Problem with ASM IRQ using FSR0 on PIC18F252
    By mytekcontrols in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 11th March 2008, 20:48
  2. USART Problem , but don't know where, in pc? or in PIC?
    By precision in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 15th July 2007, 08:12
  3. 1 slave 1 master 1 MAX232 1 problem ?
    By SuB-ZeRo in forum mel PIC BASIC Pro
    Replies: 19
    Last Post: - 31st July 2005, 22:59
  4. weird 12F629/675 problem
    By peterdeco1 in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 7th October 2004, 01:08
  5. PORTA.PinNo = 1 ' problem
    By frank small in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 6th May 2004, 14:30

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules