Transceivers with 2 different PICs.

[Eng4444]

Hi Eng4444,
If you want help then give us something to work with besides part numbers. You were asked to show some code and perhaps a schematic. We went back and forth guessing before. I'm not doing it now. I love helping people but I can only go so far with my hands tied behind my back. If we had the right information from the beginning maybe we could wrap things up quicker.

BobK

__________________________________________________ _______________

Sorry to say this but maybe you are just very good in talking...

you keep on saying: give infos, give explanations.....

Whevever you asked it, i directly wrote 2 lonnnnnnnnnnng posts where i explained to you what i did. and then, i sent you a message telling you that: "i wrote explanations so please check them".

But since then, you disappeared!

And here you returned here... with your same sentence: GIVE INFOS!!

Now you will disappear again and when i will ask a third questions you will return... so see you at a later time!

[paul borgmeier]

Eng4444,

On your last big problem, BobK gave you eveything you needed to solve your problem in this post here.

http://www.picbasic.co.uk/forum/showthread.php?t=3977

Everything! - Reread it carefully and you will see, that with a little effort from you, your troubles could have easily been solved.

With your new problem, no one has a clue what could be wrong because you have provided no details.
Ioannis suggested something to try – did it work?
With no response from you, BobK asked a very good question in an effort to HELP YOU.

Post “your” code (not Melanie's), tell us what does not work and you might be able to get some help from someone whose bridge you have not burned.

... i want you to understand that working with PIC is not my specialization at all ... But it just happened that in my senior project, i am adding an extra part and using PIC. Then, i will never see PIC in my whole life.

When do you graduate? In a strange kind of way, I think we will miss you ...

Paul Borgmeier
Salt Lake City, Utah
USA

[Acetronics2]

Hi, Mel, Bob, Paul ...

I just hope our friend's examinators will have a look to this forum ... to help for their final decision.

Alain

That strangely reminded me a .177 pellets story from Turkey ... not so far ago.