Cable Length Between Micros

[markcadcam]

I'll check it out. Thanks!

Mark

[Melanie]

Point-to-Point 2km for proper RS232 and that's without line extenders...

[sayzer]

Point-to-Point 2km for proper RS232 and that's without line extenders...

...and can go up to 4000 feet on a pair of wires...

Are you guys (and girls) saying that we can put 2000meters of RS232 cable between two PICs and expect them to see each other on the line?

-------------

[Melanie]

At proper RS-232 levels (not at logic levels) yes. If you use unshielded CAT5 cable then a little less. If you want more, use a line extender.